Z00MER  (Relion)     


... allows 2/4/8/16/32 x  magnification and will work with mouse
or keyboard.Cursors give slow pixel movements.

To use the Z00MER... load the program; a menu lets you load in a
screen,  save  it  when  you've  finished, or Z00M. When Z00M is
selected,  the  screen  is  displayed and a stripey box appears.
This represents the area to be magnified - move the box with the
mouse  or  keyboard  (in  which  case use keys Q,S,I,0 and M and
SPACE  for  buttons  1  and  2  respectively). Press button 1 to
magnify the selected area.

You  can  then  move  the pointer over the grid and click in the
grid to set pixels. Clicking at the edges of the grid will shift
the  magnified area until the edge of the screen is reached. The
grid  can  also  be  moved  by clicking on one of the four arrow
icons. Clicking on these with button 2 rather than button 1 will
move a whole grid's worth.

IN and 0UT will change the magnification.

GRAB  displays  the screen and box again and lets you grab a new
area.

If  you  click  in  the  "PL0T" box, then the box will change to
"LINE".  This  indicates  which  mode  you're in. The difference
between the two is that in LINE mode, all points are joined with
a line; this is only really any use when using the mouse.

If  you  click  on FILL, pressing button 1 in the grid will then
fill the area pointed to.

Pressing button 2 at any point will display the screen.

Pressing  both  buttons  in the grid displays the co-ordinate of
that pixel.

Everything else should be self explanitory.